Cables & Wires

Standard DC cable you can use to power an Odroid-C2 computer. Center (RED) of DC plug is positive an..

1.72€ Euro

This cable a standard USB cable that you can connect on one side to a computer (Type A) and the ot..

2.68€ Euro

Part List10x 4P cableCompatibilityDynamixel MX-28TDynamixel MX-28R..

10.23€ Euro

This jumper wires ribbon can be used for connecting any PCB to an external device. They have standar..

2.71€ Euro

Set of 10 alligator clip. They can be handy in your electronic or robotic project especially when st..

3.43€ Euro

These 3P cables are intended to be used with the Dynamixel AX and MX series. Options ..

10.13€ Euro

Features cable to use with Dynamixel XL series flexible for easy wire binding Par..

12.02€ Euro

Standard USB mini-B cable. Features type: USB 2.0 length: 1 m Part List ..

2.40€ Euro

55 cm long wire for the TinkerKit! Serial Port with a 4 pin jumper on both sides. Suitable for the L..

0.77€ Euro 2.40€ Euro

The Robotis 3P cable set is composed of 26 pieces of variable lengths (60 mm, 100 mm, 140 mm, 180 mm..

31.25€ Euro

This ribbon cable has a female 2x3 IDC connector on each end and is designed to plug into a 2x3..

2.40€ Euro

Featureslength: 100 cmwire diameter: 24 AWGPart List1x cableDocumentsSeeedstudio documentation..

2.10€ Euro

Featureslength: 100 cmwire diameter: 24 AWGPart List1x cableDocumentsSeeedstudio documentation..

2.10€ Euro

Features 3P-5P conversion cable used for connecting 3P sensors with GPIO port on contr..

7.97€ Euro

This jumper wires ribbon can be used for connecting any PCB to an external device. They have standar..

2.71€ Euro