The Odroid-XU4 Rugged Case is made of 3 mm thick ABS on the sides and 1.5 mm thick on the top and bottom. It comes with a couple of upgrades as compared to the default Hardkernel box. We have replaced the default M2 screws used in Hardkernel enclosure by M3 screws that fit perfectly on the Odroid-XU4 board. It is also equipped with brass inserts so that you can open and close the case many times. It comes also with a plastic cap that extend Odroid-XU4 board pushbutton.
This case gives access to the side connectors such as RJ45, USB, microSD card, HDMI and DC jack
Please don't purchase this case if you need to replace the fan with a passive heat sink or want to purchase the Odroid-XU4Q.
- material: ABS
- available colors: black, gold, green, grey, orange, blue, red
- M3 screws and brass inserts to fit on Odroid-XU4 board
- push button cap for Odroid-XU4 pushbutton
- safe microSD card slot so the microSD card does fall inside enclosure!
- 1x Odroid-XU4 case top
- 1x Odroid-XU4 case bottom
- 1x Odroid-XU4 button
- 4x M3x12 fastening screws
- 4x feet (optional)
Please notice that this product is not compatible with previous Odroid-XU4 board (white fan). In order to make it fit on the case, you need to have the Odroid-XU4 blue fan or change the fan of your old Odroid-XU4 as described here
This case is also not compatible with the Odroid-XU4Q.
Odroid-XU4 Rugged Case
- Diigiit Robotics
- The Odroid-XU4 Rugged Case is high quality and heavy-duty 3D printed enclosure that is a nice upgrade to the default Hardkernel plastic case.
- Availability: 3 (France)
- 9.01€ Euro EUR 103.01 Left For Free Shipping
- 10 or more 8.80€ Euro
- 25 or more 8.58€ Euro
- 100 or more 7.73€ Euro