The Adafruit motor shield V2 kit is one of the most popular product from the brand. This second revision of the motorshield is one of the best product on the market to drive 4 DC motors or or 2 stepper motors for your robotic project.

The embed TB6612 MOSFET will provide 1.2 A per motor with a peak at 3 A. As compared to the previous release, you will get more torque out of your batteries.

The board has its own PWM driver chip that handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo or Mega R3.

The Adafruit motor shield v2 is completely stackable so that you can control motor motor that you will probably need in your project.

Features

  • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Motors automatically disabled on power-up
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Arduino reset button brought up top
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • Download the easy-to-use Arduino software library, check out the examples and you're ready to go!

Part List

  • 1x motor shield
  • 1x 1x36 male header
  • 1x 3x2 male header
  • 2x 3-pin screw terminal block
  • 3x 2-pin screw terminal block

Compatibility

Documents

Mechanics
Dimensions L x W x H 70 mm x 55 mm x 10 mm

Write a question

Please login or register to review

Write a review

Please login or register to review

Adafruit Motor Shield (DC, Stepper, Servo) for Arduino v2 Kit

  • Adafruit Industries
  • Adafruit motor shield can control both stepper and servo motors. Fast and affordable delivery available.
  • --
  • Availability: 3 (France)
  • 17.13€ Euro 16.27€ Euro
  • EUR 154.51 Left For Free Shipping

Related Products

Standard DC motor 6V 12500RPM

Standard DC motor 6V 12500RPM

Standard DC motor, easy to operate, that can be used in any basic project. Typical toy or hobby moto..

0.86€ Euro 1.03€ Euro

Pololu DRV8834 Low-Voltage Stepper Motor Controller

Pololu DRV8834 Low-Voltage Stepper Motor Controller

The DRV8834 stepper motor driver lets you control one bipolar stepper motor. The board's pinout and ..

5.11€ Euro

Pololu DRV8824 Low-Voltage Stepper Motor Controller

Pololu DRV8824 Low-Voltage Stepper Motor Controller

The Pololu DRV8824 is a carrier board for TI’s DRV8824 stepper motor driver. The board can deliver u..

2.58€ Euro 5.15€ Euro

Adafruit 16-Channel 12-bit PWM/Servo Driver I2C Interface

Adafruit 16-Channel 12-bit PWM/Servo Driver I2C Interface

The Adafruit 16-Channel servo driver let you control 16 free-running PWM outputs using only two pins..

10.26€ Euro 12.83€ Euro

Tags: adafruit, stepper motor controller