• Pancake Stepper Motor - NEMA 20, 50²x16mm

This flat stepper motor (21 mm including the shaft) of 200 steps/revolution (i.e. a 1.8° step angle) has a weight of 150 g. It uses 5.9 V at 1000 mA to create a torque of 2.2 kg-cm. The 5 mm diameter D-shaft has been flattened by 0.5 mm. The motor has four color-coded wires terminated with bare leads: red and yellow connected to one coil; orange and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.

Features

  • size: 50 mm square x 11.6 mm, not including the shaft
  • weight: 150 g
  • shaft diameter: 5 mm “D”
  • steps per revolution: 200
  • current rating: 1000 mA per coil
  • voltage rating: 5.9 V
  • resistance: 5.9 Ohm per coil
  • holding torque: 2.2 kg-cm
  • inductance per phase: 3.2 mH
  • lead length: 30 cm

Part List

  • 1x stepper motor
Mechanics
Dimensions L x W x H 50 mm x 50 mm x 16 mm
Weight 150 g

Write a question

Please login or register to review

Write a review

Please login or register to review

Pancake Stepper Motor - NEMA 20, 50²x16mm

  • The Sanyo SS2502-8040 NEMA 20 is a medium size (50²x16) 200 steps/rev. pancake stepper motor with a holding torque of 2.2 kg-cm at 5.9V@1A.
  • --
  • 51.46€ Euro
  • EUR 154.51 Left For Free Shipping

  • 5 or more 51.29€ Euro
  • 10 or more 51.12€ Euro
  • 25 or more 50.65€ Euro

Tags: sanyo, stepper motor, stepper motor nema 20